How to De-scale Your Keurig Brewer

Many of our customers have asked this question so I decided to post the Keurig recommended process for de-scaling their coffee systems.

For Your Keurig Platimun, Special Edition, Ultra, and Elite brewing systems;

A. Prepare

Step 1: Make sure you have 48 ounces of white vinegar on hand. You will also need an
empty sink and a ceramic mug(Do not use a paper cup).

Step 2: Empty the water in the reservoir.

B. Fill And Clean

Step 1: Pour the vinegar into the Water Reservoir and fill it to the top edge of the clear viewing area.

Step 2: Place a ceramic cup into the Drip Tray and run a brew cycle. DO NOT USE A
K-CUP....Just press the Large Cup Button. Pour the contents of the cup into
the sink.

Step 3: Repeat the brew process until the Water Reservoir is empty, pouring the
contents of the cup into the sink after each cycle.

Step 4: Now fill the contents of the reservoir with fresh water and let the brewer stand for 4 hours while still on.

C. Rinse

Step 1: Ensure the Water Reservoir is filled with fresh water.

Step 2: Place a ceramic cup on the Drip Tray and run a regular brew cycle. Pour the
contents of the cup into the sink.

Step 3: Repeat the brew process until the water reservoir is empty.

Step 4: You may need to perform additional brew cycles if you notice any additional.
tastes.

So there you have it... :)